ON7FU Ferrite Applications

Professionally constructed BALUNs, UNUNs and RF Transformers for amateur radio use

  • Home
  • About Us
    • About Us
    • Feedback and Reviews
  • Legal info
    • General Conditions for Safe Use of ON7FU products.
    • Product Regulatory Compliance.
    • General Terms and Conditions.
    • Privacy Statement
    • Disclaimers.
  • Tech. Info
    • Proof of Performance / Measurement Results
    • Power Specifications: ICAS versus CCS.
    • “Why do I need a kilowatt + rated BALUN; ……. I’m never running more than 200 Watts”.
    • Correct use of ON7FU ANTENNA TUNER BALUNs.
    • Reducing RF Noise in the radio environment
    • Mounting Flanged Enclosure on Boom, Mast or Support Tube
    • BALUN: What it is and what it’s supposed to do.
    • Scenarios
    • To keep in mind.
    • Optimum Common-Mode RF Current and Noise Elimination.
    • Polycarbonate enclosures
    • Links to interesting publications.
  • Contact / Order
    • Contact / Order
  • GALLERY
  • BALUNs
    • Standard 1/1 BALUN
    • Lightweight Medium Power 1/1 BALUN
    • High Power 4/1 BALUN
    • Antenna Tuner BALUN
  • UNUNs
    • High Power 9/1 UNUN
    • High Power 4/1 UNUN
    • High Power 1/2 UNUN
  • Line Isolators
    • High Power Range Optimized Coaxial Line Isolator
    • Wideband Coaxial Line Isolator
    • Balanced Line Isolator.
    • HexBeam “BALUN”
  • RX Antenna Products
    • RX Antenna Matching Transformers
    • RX Antenna Termination Resistors
    • 75 to 50 Ohms Transformer.
  • FERRITE products
    • Toroidal Ferrites for HF
    • Ferrite Sleeves for VHF
  • Miscellaneous
    • Customization
    • Teflon Coaxial Cable.

Mounting Flanged Enclosure on Boom, Mast or Support Tube

ON7FU BALUNs and LINE ISOLATORs are built in enclosures with flanges, containing mounting holes.

So they can be installed on any surface in an easy way, using screws or bolts.

In order to install them on a boom of a beam, or on a support tube or mast, the user can make a suitable mounting plate with brackets, hose clamps or hydraulic clamps. (Hydraulic clamps (So called “Stauff” clamps) with a 2 inch bolt center-to-center distance are a perfect solution).

Alternatively cable ties can be used, following the next steps:

Use 5mm x 400 mm (or longer) weather and UV resistant cable ties.

Insert the cable tie trough the enclosure holes as shown in the following picture:

Mount on boom or mast as follows:

Tighten cable tie with pliers

ALL SET.

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org

Read customer reviews on eHam .net

Copyright © 2022 ~ ON7FU Ferrite Applications ~ Based on theme The Funk by Hardeep Asrani
Proudly powered by WordPress